Industry Standards for Passenger Transit, Rail Vehicle Specifications

Standards (Alphabetical)


Standards List - Alphabetical Sort

Key

Standard Number

Description / Title

Status

L 14 CFR 25 Airworthiness Standards: Transport Category Airplanes Active
L 29 CFR 1910 Occupational Safety and Health Administration, Department of Labor Active
L 40 CFR 201 Noise Emission Standards for Transportation Equipment; Interstate Rail Carriers Active
L 40 CFR 89 Control of Emissions From New and In-Use Nonroad Engines Active
L 40 CFR part 82 Stratospheric Ozone Protection Rule (Environmental Protection Agency) Active
L 40 CFR Part 85, 89 and 92 Environmental Protection Agency, Emission Standards for Locomotives and Locomotive Engines Active
L 49 CFR Parts 27, 37 & 38 Transportation for Individuals with Disabilities (Americans with Disabilities act - ADA) Active
L 49 CFR 210 Railroad Noise Emission Compliance Regulations Active
L 49 CFR 213 FRA Track Standards Active
L 49 CFR 221 Rear End Marking Device - Passenger, Commuter and Freight Trains Active
L 49 CFR 223 Safety Glazing Standards - Locomotives, Passenger Cars and Cabooses Active
L 49 CFR 228 Appendix C Guidelines for Clean, Safe, and Sanitary Railroad Provided Camp Cars Active
L 49 CFR 238 Passenger Equipment Safety Standards Active
L 49 CFR 239 Emergency Preparedness Plan Active
L AA Aluminum Association Standards for Aluminum Mill Products Active
NL AAR RP-585 Wiring and Cable Specification. Active
NL AAR RP-587 Wire and Cable Insulating Material—Silicone Rubber Insulated. Active
NL AAR Standard S 501 Specification for Wire and Cables Active
L AATCC 99-2000 Dimensional Change of Woven or Knitted Textiles: Relaxation, Consolidation, and Felting Active
NL ANSI B1.1 Unified Inch Screw Threads (UN and UNR Thread Form) (AKA ASME B1.1) Active
NL ANSI B18.1.2 Square and Hex Bolts and Screws Inch Series (AKA ASME B18.1.2) Active
L ANSI C37 Circuit Breakers Active
L ANSI S1.4 Specification for Sound Level Meters Active
L ANSI S1.6 Preferred Frequencies, Frequency Levels, and Band Numbers for Acoustical Measurements Active
L ANSI S1.11 Specifications for Octave-Band and Fractional-Octave-Band Analog and Digital Filters Active
L ANSI S1.13 Methods for the Measurement of Sound Pressure Levels Active
L ANSI Z26.1 Safety Code for Safety Glazing Materials for Glazing Motor Vehicles Operating on Land Highways Active
N ANSI Z400.1 Hazardous Industrial Chemicals - Material Safety Data Sheets - Preparation Active
L APA PS1-95 National Institute of Standards and Technology Active
L APTA RP-E-002 Recommended Practice for Wiring of Passenger Equipment Active
L APTA RP-E-004 Recommended Practice for Gap and Creepage Distance Active
L APTA RP-E-009 Recommended Practice for Wire Used on Passenger Rolling Stock Active
L APTA RP-C&S-003-98 Recommended Practice for Developing a Clearance Diagram for Passenger Equipment Active
NL APTA RP-M-003-98 Purpose and Acceptance of Type H-Tightlock Couplers and Coupler Parts Active
NL APTA RP-M-009-98 Recommended Practice for New Truck Design Active
L APTA SS- C&S-004-98 Standard for Austenitic Stainless Steel for Railroad Passenger Equipment Active
L APTA SS- C&S-005-98 Standard for Carbody in the Compressive Strength for Railroad Passenger Vehicles Active
L APTA SS-C&S-007-98 Standard for Fuel Tank Integrity for Non-Passenger Carrying Passenger Locomotives Active
L APTA SS-C&S-002-98 Standard for Static Strength of Attachment of Major Equipment to the Car Body Structure of Railroad Passenger Equipment Active
L APTA SS-C&S-004-98 Standard for Austenitic Stainless Steel for Railroad Passenger Equipment Active
L APTA SS-C&S-006-98 Standard for Attachment Strength of Interior Fittings to Passenger Railroad Equipment Active
L APTA SS-C&S-008-98 Standard for Truck to Car Body Attachment Strength Active
L APTA SS-C&S-010-98 Standard for Car Body Roof Strength Active
L APTA SS-C&S-013-99 Standard for Corner Post Structural Requirements for Railroad Passenger Equipment Active
L APTA SS-C&S-014-99 Standard for Collision Post Structural Requirements for Railroad Passenger Equipment Active
L APTA SS-C&S-015-98 Standard for Aluminum and Aluminum Alloys for Passenger Equipment Car Body Construction Active
L APTA SS-C&S-018-99 Standard for Car Body Side Strength for Railroad Passenger Equipment Active
NL APTA SS-E-005-98 Standard for Grounding and Bonding Active
L APTA SS-C&S-034-99 Standard for the Design and Construction of Passenger Railroad Rolling Stock Active
L AREMA Chapter 28, Clearance Diagrams, Fixed Obstructions and Equipment Diagrams Active
L ASHRAE Fundamentals Handbook (Table 1A, and 1B, Climactic Conditions for the United States) Ed Moore - SF Office - Has full set in hardcopy Active
L ASME Pressure Vessel Code Active
L ASME B31.1 Power Piping Active
L ASTM A27 Steel Castings, Carbon, for General Application Active
L ASTM A31 Steel Rivets and Bars for Rivets, Pressure Vessels Active
L ASTM A53 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless Active
NL ASTM A123 Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products Active
L ASTM A242 Standard Specification for High-Strength Low-Alloy Structural Steel Active
L ASTM A262 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels Active
L ASTM A269 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service Active
L ASTM A275 Standard Test Method for Magnetic Particle Examination of Steel Forgings Active
L ASTM A488 Standard Practice for Steel Castings, Welding, and Qualifications of Procedures and Personnel Active
L ASTM A502 Steel Structural Rivets Active
L ASTM A514 Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding Active
NL ASTM A515 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service Active
NL ASTM A516 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service Active
NL ASTM A568 Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for Active
L ASTM A588 Standard Specification for High-Strength Low-Alloy Structural Steel With 50 Ksi Minimum Yield Point to 4 In. Thick Active
L ASTM A606 Standard Specification for Steel, Sheet, and Strip, High-Strength, Low-Alloy, Hot-Rolled, and Cold-Rolled, With Improved Atmospheric Corrosion Resistance Active
L ASTM A666 Standard Specification for Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar Active
L ASTM A672 Standard Specification for Electric-Fusion-Welded  Steel Pipe for High-pressure Service at Moderate Temperatures Active
L ASTM A903 Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection Active
L ASTM A966 Standard Test Method for Magnetic Particle Examination of Steel Forgings Using Alternating Current Active
L ASTM B26 Aluminum-Alloy Sand Castings Active
L ASTM B33 Specification for Tinned Soft or Annealed Copper Wire for Electrical Purposes Active
L ASTM B85 Aluminum-Alloy Die Castings Active
L ASTM B88 Standard Specification for Seamless            Copper Water Tube Active
L ASTM B108 Aluminum-Alloy Permanent Mold Castings Active
L ASTM B174 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors Active
NL ASTM B187 Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes Active
NL ASTM B221 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes Active
L ASTM B247 Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings Active
L ASTM B456 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium Active
L ASTM B633 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel Active
L ASTM B828 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings Active
L ASTM C177 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus (Supersedes ANSI Z98.1) Active
L ASTM C542 Specification for Lock-Strip Gaskets Active
L ASTM C1036 Standard Specification for Flat Glass Active
L ASTM C1048 Standard Specification for Heat-Treated Flat Glass - Kind HS, Kind FT Coated, and Uncoated Glass Active
L ASTM C1166 Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories Active
L ASTM C1422 Standard Specification for Chemically Strengthened Flat Glass Active
L ASTM D256 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics Active
L ASTM D395 Standard Test Methods for Rubber Property-Compression Set Active
L ASTM D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Rubbers and Thermoplastic Elastomers-Tension Active
L ASTM D470 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable Active
L ASTM D471 Standard Test Method for Rubber Property-Effect of Liquids Active
L ASTM D523 Standard Test Methods for Specular Gloss Active
L ASTM D573 Standard Test Method for Rubber-Deterioration in an Air Oven Active
L ASTM D618 Standard Practice for Conditioning Plastics for Testing Active
L ASTM D624 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers Active
L ASTM D638 Standard Test Method for Tensile Properties of Plastics Active
L ASTM D695 Standard Test Method for Compressive Properties of Rigid Plastics Active
L ASTM D746 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact Active
L ASTM D785 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials Active
L ASTM D790 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials Active
L ASTM D792 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement Active
L ASTM D1003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics Active
L ASTM D1055 Flexible Cellular Materials, Latex Foam Active
L ASTM D1056 Flexible Cellular Materials - Sponge or Expanded Rubber Active
L ASTM D1149 Standard Test Method for Rubber Deterioration-Surface Ozone Cracking in a Chamber Active
L ASTM D1186 Standard Test Methods for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to a Ferrous Base Active
L ASTM D1400 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Nonconductive Coatings Applied to a Nonferrous Metal Base Active
L ASTM D1683 Test Method for Failure in Sewn Seam of Woven Fabrics Active
L ASTM D2047 Standard Test Method for Static Coefficient of Friction of Polish-Coated Floor Surfaces as Measured by the James Machine Active
L ASTM D2200 Standard Pictorial Surface Preparation Standards for Painting Steel Surfaces Active
L ASTM D2240 Standard Test Method for Rubber PropertyDurometer Hardness Active
L ASTM D2244 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates Active
L ASTM D2262 Test Method for Tearing Strength of Woven Fabrics by the Tongue (Single Rip) Method (Constant-Rate-of-Traverse Tensile Testing Machine) Active
L ASTM D2583 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor Active
L ASTM D2651 Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding Active
L ASTM D2671 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use Active
L ASTM D2724 Standard Test Methods for Bonded, Fused, and Laminated Apparel Fabrics Active
L ASTM D3359 Standard Test Methods for Measuring Adhesion by Tape Test Active
L ASTM D3512 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester Active
NL ASTM D3574 Standard Test Methods for Flexible Cellular Materials-Slab, Bonded, and Molded Urethane Foams Active
L ASTM D3597 Standard Specification for Woven Upholstery Fabrics-Plain, Tufted, or Flocked Active
L ASTM D3675 Standard Test Methods for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source Active
L ASTM D3775 Standard Test Method for Fabric Count of Woven Fabric Active
L ASTM D3776 Standard Test Methods for Mass Per Unit Area (Weight) of Fabric Active
L ASTM D3884 Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method) Active
L ASTM D4034 Standard Test Method for Resistance to Yarn Slippage at the Sewn Seam in Woven Upholstery Fabrics Active
NL ASTM D4329 SStandard Practice for Fluorescent UV Exposure of Plastics Active
L ASTM D5034 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test) Active
L ASTM E119 Standard Test Methods for Fire Tests of Building Construction and Materials Active
L ASTM E162 Standard Test Methods for Surface Flammability of Materials Using a Radiant Heat Energy Source Active
L ASTM E165 Standard Test Method for Liquid Penetrant Examination Active
L ASTM E424 Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials Active
L ASTM E433 Standard Reference Photographs for Liquid Penetrant Inspection Active
NL ASTM E446 Standard Reference Radiographs for Steel Castings Up to 2 in. (51 mm) in Thickness Active
L ASTM E648 Standard Test Methods for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source Active
L ASTM E662 Standard Test Methods for Specific Optical Density of Smoke Generated by Sold Materials Active
L ASTM E709 Standard Guide for Magnetic Particle Examination Active
L ASTM E1316 Standard Terminology for Nondestructive Examinations Active
L ASTM E1354 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using An Oxygen Consumption Calorimeter Active
L ASTM E1417 Standard Practice for Liquid Penetrant Examination Active
L ASTM E1444 Standard Practice for Magnetic Particle Examination Active
NL ASTM E1537 Standard Test Method for Fire Testing of Upholstered Furniture Active
NL ASTM E1590 Standard Test Method for Fire Testing of Mattresses Active
L ASTM E424 Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials Active
NL ASTM F519 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating Processes and Service Environments Active
L ASTM F593 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs Active
L ASTM F594 Standard Specification for Stainless Steel Nuts Active
NL ASTM F606 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets Active
L ASTM F1344 Standard Specification for Rubber Floor Tile Active
L ASTM F1941 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR)) Active
NL ASTM G26 Included in ASTM G155 - 05a Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials Active
L ASQC C1 Specification of General Requirements for a Quality Program Active
L ASQC M1 Calibration Systems Active
L ASQC Q10007 Quality Management - Guidelines for Configuration Management Active
L AWS A5.01 Filler Metal Procurement Guidelines Active
L AWS C1.1 Welding Resistance - Recommended Practices Active
L AWS D1.1 Structural Welding Code Steel Active
L AWS D1.2 Structural Welding Code - Aluminum Active
L AWS D1.3 Structural Welding Code - Sheet Steel Active
L AWS D15.1 Railroad Welding Specification - Cars and Locomotives. Active
L AWS D1.6 Structural Welding Code - Stainless Steel Active
L BSS-7239 Test Method for Toxic Gas Generation From Materials on Combustion Active
L CFFA-15 Stretch And Set Active
L CFFA-16C Tearing Strength Active
L CFFA-17 Tensile Strength And Elongation Active
L CFFA-1A Abrasion Resistance Active
L CFFA-2 Accelerated Light Aging Active
L CFFA-3A Adhesion Of Coating To Fabric Active
L CFFA-4 Blocking Active
L CFFA-6A Cold Crack Resistance Active
L CFFA-7 Crocking Resistance Active
L CFFA-700 Dimensions of Coated Fabric Active
R DIN 267 Fasteners Technical Specifications Active
R FAR 25.853 Air Worthiness Standards: Transport Category Airplanes, Fire Protection, Compartment Interiors Active
R FED-STD-191 Textile Test Methods
* Although "Inactive" this standard is still referenced extensively in other active standards
Inactive*
NL EN 50155 Electronic equipment on rail vehicles Active
NL EN 60603 Connectors Active
NL ICEA-S-66-524 Crosslinked Polyethylene Insulated Wire and Cable for Transmission and Distribution of Electrical Energy Active
NL IEC 249 (60249) Base Materials for Printed Circuits Active
L IEC 61188-5-1 Design and Use of Printed Circuit Boards Active
L IEC 60034-14 Rotating Electrical Machines Part 14: Mechanical Vibration of Certain Machines With Shaft Heights 56 Mm and Higher Measurements, Evaluation and Limits of Vibration Active
L IEC 60077 Rules for Electric Traction Equipment
(This is a 5 part standard)
Active
L IEC 60571 Electronic Equipment Used On Rail Vehicles Active
L IEC 61133 Electric Traction - Rolling Stock - Test Methods for Electric and Thermal/Electric Rolling Stock on Completion of Construction and Before Entry Into Service Active
L IEEE 11 Rotating Electric Machinery For Rail And Road Vehicles Active
NL IEEE 16 IEEE Standard for Electrical and Electronic Control Apparatus on Rail Vehicles Active
L IEEE 383 Type Test for Class 1E Electric Cables, Field Splices, and Connections Active
L IEEE 730 Software Quality Assurance Planning Active
L IEEE 1016 Recommended Practice for Software Design Descriptions Active
NL IPC-2220 (series) Design Standards for Printed Circuit Boards Active
NL IPC-A-610D Acceptability of Electronic Assemblies Active
NL IPC-HDBK-001 Handbook and Guide to the Requirements for Soldered Electrical and Electronic Assemblies to Supplement ANSI/J-STD-001B Active
NL IPC-HDBK-830 Guidelines for Design, Selection and Application of Conformal Coatings Active
NL IPC J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies Active
L ISO 898 Mechanical Properties Of Fasteners Made Of Carbon Steel And Alloy Steel Active
L ISO 2631/1 Evaluation of Human Exposure to Whole Body Vibration Part 1: General Requirements (First Edition, 1985, Applies) Active
L ISO 3095 Acoustics: Measurement of Noise Emitted by Rail Bound Vehicles Active
L ISO 3381 Acoustics: Measurement of Noise Inside Rail Bound Vehicles Active
L ISO 3506 Mechanical Properties Of Corrosion Resistant Stainless-Steel Fasteners Active
L ISO 4042 Threaded Components - Electroplated Coatings Active
L MIL-A-9067 Adhesive Bonding Process And Inspection Requirements For Active
L MIL-C-7438 Core Material, Aluminum, for Sandwich Construction Active
L MIL-DTL-5015H Connectors, Electric, Circular Threaded, AN Type, General Specification For Active
NL MIL-DTL-55302 Connectors, Printed Circuit, Subassembly and Accessories Active
L MIL-HDBK-349 Manufacture and Inspection of Adhesive Bonded, Aluminum Honeycomb Sandwich Assemblies for Aircraft Active
NL MIL-HDBK-470A Designing and Developing Maintainable Products and Systems, Volume I and Volume Ii Active
L MIL-HDBK-691B Adhesive Bonding Active
L MIL-P-8053 Plywood, Metal-Faced (Canceled but used for reference) Canceled
NL MIL-P-23469 Pin-Rivet, Grooved And Collar, Grooved Pin-Rivet, Swage-Locked (Lockpin) General Specification For Active
L MIL-PRF-6106 Relays, Electromagnetic, Including Established Reliability Types Active
L MIL-S-7998 Sandwich Construction Core Material, Balsa Wood, Inactive
L MIL-STD-461 Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment Active
L MIL-STD-462 Test Method Standard For Measurement Of Electromagnetic Interference Characteristics Active
NL MIL-STD-810 Environmental Engineering Considerations and Laboratory Tests Active
NL MIL-STD-883 Test Method Standard, Microcircuits Active
L MIL-STD-889 Dissimilar Metals Active
L MIL-STD-1472 Human Engineering Design Criteria Active
NL MIL-W-22759/10B Wire, Electrical, Fluorocarbon Insulated, Abrasion Resistant, Extruded PTFE, Nickel Coated Copper Conductor, 1000 Volt Active
NL MIL-W-22759/6B Wire, Electrical, Fluorocarbon Insulated, Abrasion Resistant, Extruded PTFE, Nickel Coated Copper Conductor, 600 Volt Active
NL MIL-W-81381B Wire, Electric, Polyimide Insulated, Copper or Copper Alloy Active
L MIL-W-81044 Wire, Electric, Crosslinked Polyalkene, Crosslinked Alkine-Imide Polymer, or Polyarylene Insulated, Copper or Copper Alloy Active
L NEMA AB1 Molded Case Circuit Breakers Active
L NEMA AB3 Molded Case Circuit Breakers and Their Application Active
L NEMA LD 3 High Pressure Decorative Laminates Active
L NEMA LI1 Industrial Laminated Thermosetting Products Active
L NEMA WC 70 (ICEA S-95-658) - Standard for Nonshielded Power Cables Rated 2000 Volts or Less for Use in the Distribution of Electrical Energy Active
L NEMA WC 71 (ICEA S-96-659) - Standard for Nonshielded Power Cables Rated 2001-5000 Volts for Use in the Distribution of Electrical Energy Active
L NFPA 70 (NEC) National Electrical Code Active
R NFPA 130 Standard for Fixed Guideway Transit Systems Active
L Powder Coating Institute Gloss Level Standard Active
L PS1-95 Voluntary Product Standard of the American Plywood Association Active
L SAE AMS W 6858 Welding, Resistance: Spot and Seam Active
L SAE-AS22759/6 Wire, Electrical, Fluorocarbon-Insulated, Abrasion Resistant Extruded PTFE, Nickel-Coated Copper Conductor, 600 Volt Active
L SAE J287 Driver Hand Control Reach Active
NL SAE J403 Chemical Compositions of SAE Carbon Steels Active
L SAE J429 Mechanical and Material Requirements for Externally Threaded Fasteners Active
L SAE J447 Prevention of Corrosion of Motor Vehicle Body and Chassis Components Active
L SAE J671 Vibration Damping Materials and Underbody Coatings Active
L SAE J673 Automotive Safety Glass Active
L SAE J680 Location and Operation of Instruments and Controls in Motor Truck Cabs Active
L SAE J995 Mechanical and Material Requirements for Steel Nuts Active
L SAE J1050 Describing and Measuring the Driver's Field of View Active
L SAE J1139 Direction-Of-Motion Stereotypes for Automotive Hand Controls Active
L SAE J1199 Mechanical and Material Requirements for Metric Externally Threaded Fasteners Active
NL SAE J1200 Blind Rivets~Break Mandrel Type Active
L SAE J1517 Driver Selected Seat Position Active
L SAE J1522 Driver Stomach Position Active
NL SAE J1885 Accelerated Exposure of Automotive Interior Trim Components Using a controlled Irradiance Water Cooled Xenon-Arc Apparatus Active
L SAE J1889 LED Lighting Devices Active
L SAE J2042 Clearance, Sidemarker, and Identification Lamps for Use on Motor Vehicle 2032mm or More in Overall Width Active
L SAE J2139 Tests for Lighting Devices and Components Used on Vehicles 2032mm or More in Overall Width Active
L UMTA-DC-06-0152-83-1 A Corrosion Control Manual for Rail Rapid Transit Active

Key:

L - this standard is listed in this document.
R - this standard is listed as reference only.
NL - this standard is not yet listed in this document.